*For visual impression only.
*For visual impression only.
Play Video
Play Video
Catalog Number: MTD20902
The MTDRIVER is designed to assist the dental Professional
to easily and effortlessly close and open prosthetic screws with a 1.27mm hex. head
Instructions For Use:
Charge the driver (C-Type Charger)
(about 50 minutes)
Insert the 90º head, by turning it onto the driver.
Insert the 1.27mm bit into the head of the screw driver.
Open and close buttons, allowing easy and simple operation of the driver.
5.For cleaning, disconnect the 90º head, clean and place in the autoclave.
Electric Torque:
low torque: 0.08-0.12Nm
Do not autoclave the motor.
*Please note that the driver can reach up to 30Ncm when fully charged.
200RPM
ORDER NOW